12.8415.96 20.74 28.50 39.24 47.95 date revision shield - nickel-coated copper this specification sheet forms a part of the latest issue of raychem specification 55pc. specifica tion control dra wing title four conductor cable, shielded, jacketed, general purpose, 600 volt part number 1 / conductor size (awg) upper spec limit target value upper spec limit target value diameter ( in.) weight ( lbs/1000 ft. ) lower spec limit construction details shield size (awg) lower spec limit target wall .109.119 .132 .150 .173 .188 55PC1246 component wires - 55pc0216 jacket - radiation-crosslinked, modified etfe .123.135 .150 .173 .197 .217 3838 38 38 38 38 jacket thickness (in.) 55PC1246-26-*55PC1246-24-* 55PC1246-22-* 55PC1246-20-* 55PC1246-18-* 55PC1246-16-* cable ratings and additional requirements 2624 22 20 18 16 .0080.0080 .0080 .0085 .0085 .0085 .0060.0060 .0060 .0065 .0065 .0065 .137.150 .168 .195 .221 .245 12.2215.35 20.07 27.62 38.16 46.71 shield coverage: 85% (minimum)voltage withstand test (post environmental): 1000 volts (rms), 60 hz, 1 minute part number: the "*" in the part numbers above shall be replaced by color code designators with a slash separating the component wire colors and a dash separating the component wire colors from the jacket color. 1 / example: awg 22, red, yellow, green and blue component wires; white jacket: 55PC1246-22-2/4/5/6-9 temperature rating: 200c maximum continuous conductor temperature voltage rating: 600 volts (rms) at sea level dielectric withstand: 1500 volts (rms), 60 hz crosslink verification: 300 3c for 1 hour jacket color: white preferred jacket elongation and tensile strength: elongation, 50% (minimum) tensile strength, 5000 lbf/in2 (minimum) jacket flaws: spark test, 1000 volts (rms) impulse dielectric test, 6.0 kv (peak) 11-22-06 r e vie w a tyco electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to buyer. r wire & cable 501 oakside avenueredwood city, ca 94063-3800 phone: 1-800-227-8816 fax: 1-650-361-6297 page 1 of 1 this specification sheet takes precedence over documents referenced herein. referenced documents shall be of the issue in effect on date of invitation for bid. dimensions are in inches and, unless otherwise designated, are nominal 1 / colors and color code designators shall be in accordance with mil-std-681. however, due to length limitations of the raychem part number, an alternative color code may replace mil-std-681 color code designators. (example: 901/902... may be replaced by axxx.) other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. users should evaluate the suitability of this product for their application. specifications are subject to change without notice. ? 2006 tyco electronics corporation. all rights reserved.
|
